Timber Decking: Three Crucial Tips on Staining Your Wood

Choosing the perfect finishing product for your deck is an essential process in timber construction. Your selection will determine the appearance of the outdoor structure and the performance of the wood in adverse conditions. Staining is one of the favourable finishing processes for decking. This type of product will enhance the wood grain instead of completely concealing the natural appeal of the material. Also, the finish will penetrate the wood, protecting the boards from moisture damage. Under ideal circumstances, it is advisable to purchase pre-finished timber from your supplier. If you are interested in performing the staining task onsite, consider using these practical tips for optimal success:

Prepare the Timber

You should prepare your wood before applying your stain. If you are using old or reused timber for the project, you will need to perform thorough cleaning first. Sanding, scraping and general washing will ensure the removal of residue finishing and fungi. This cleaning process will ensure that the timber is a plain canvas when staining. Consequently, the appeal will be higher. If you have purchased fresh lumber for the deck, you will not need to perform significant cleaning. However, some woods are not very absorbent; they might not take in the stain. If this is the case, your timber supplier or manufacturer might recommend the use of a conditioner. 

Test Your Stain

There are different stains on the market, and the range can be confusing for first-time buyers. Therefore, you should make a detailed comparison of the products in the market before selection. However, you should not start applying the product to your deck immediately after purchasing the product. Instead, use a piece of scrap or remnant wood to test the stain. Make sure that the desired colour is produced after application. Remember, stains are permanent; you cannot clean off the finish. It is also advisable to always stir the stain before testing or applying the product. In some cases, the pigments and dyes in commercial stains settle at the bottom. A quick stir will ensure fluid uniformity. 

Choose Ideal Tools

Finally, you should select the most appropriate tools for your staining project. This choice will determine the quality of the results as well as your speed and efficiency when working. If you are staining a large area and time is of the essence, you can utilise rollers and brushes. These tools will ensure completion of the staining tasks in no time. However, if you are interested in intricate, traditional work, you should use soft, wool pads.

Contact a company that has timber for sale for more information and assistance. 

Share